myfreeVINcheck

2010 Ford F-150 Recalls: One Campaign on File, and How to Check Your Truck

NHTSA's recall data lists a single campaign for the 2010 Ford F-150: 11V049000, a door handle spring that can break and let a latch open in a side impact. One entry is a short list, but it applies only to trucks built in a set window, so the VIN settles it. The VIN decode and the recall check here run on NHTSA data and cost nothing.

Updated November 5, 2026 · Sources cited below

Have a VIN? Check that car

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.

View sample report
Pickup truck parked outdoors beside a panel with three F-150 recall points

THE SHORT ANSWER

The NHTSA recalls database holds one campaign under the 2010 F-150, 11V049000, filed in January 2011 and shared with the 2009 model year. It covers the interior door handle spring, and a Ford dealer repairs it at no cost. Whether a particular truck is covered depends on its build date, so run the VIN through the recall check before you buy or after you inherit one.

Campaigns on file
One for the 2010 model year: 11V049000
Trucks in the campaign
280,946 across the 2009 and 2010 model years
Fault
Interior door handle spring can fracture
Owner cost
None at a Ford dealer

The one campaign NHTSA files under this model year

Ford reported campaign 11V049000 to NHTSA in early January 2011, and Ford itself calls it 11S15. It reaches certain 2009 and 2010 F-150 trucks built between January 18, 2008 and November 30, 2009, and NHTSA puts the potential count at 280,946 vehicles. That figure is for both model years together, not for the 2010 trucks alone.

ItemWhat NHTSA records
Campaign number11V049000 (Ford: 11S15)
PartInterior door handle housing
Build windowJanuary 18, 2008 through November 30, 2009
Repair beganFebruary 10, 2011
Cost to ownerFree at a Ford or Lincoln/Mercury dealer

A 2010 F-150 built after that November date falls outside the campaign even though the model year matches. The build date is printed on the driver door jamb sticker, and the VIN lookup applies the range for you.

What actually goes wrong inside the door

Each interior handle returns to its resting position under a small spring. A raised piece of the handle housing holds that spring in place, and Ford found it could crack through ordinary use. Once it cracks, the spring pushes too weakly to bring the handle all the way back.

The danger Ford and NHTSA describe is narrow but serious. If another vehicle hits the truck broadside, the weakened spring may give out and the latch can release mid-crash. Day to day, you may notice only a handle that feels loose or sits a little out of line after you pull it.

  • A handle that does not snap back to flush after you release it
  • A handle that feels slack compared with the other doors
  • Any door that opens on its own when the truck is struck from the side, which is the case the recall addresses

The remedy, and why it took two letters

Replacement parts were not ready when the campaign opened, so owners got a first notice telling them to see a dealer if any handle was loose or would not return. A second notice followed once parts existed. At that visit the dealer inspects every interior handle and either adds a reinforcement to the spring housing or swaps in a new handle module.

From an NHTSA owner complaint

Owners of a 2010 F150 wrote to NHTSA in June 2011 after a recall notice about the door latches arrived. Their dealer reportedly found nothing wrong and told them to ignore the notice, so they asked for a letter in writing in case a problem followed, and questioned why anyone should bother with recalls.

Take the lesson in the opposite direction. A dealer saying a handle looks fine on one visit does not close the campaign. Ask for the repair order that shows the inspection, and keep it with the truck's paperwork.

Mechanic inspecting a truck door above a grid of four F-150 recall facts

Running the check on a specific truck

Start with the 17-character VIN. Look through the glass at the driver-side base of the windshield, or read it off the registration or the insurance paperwork. Compare at least two of those; characters that disagree are a finding in themselves.

  1. Enter the VIN into the decode here to confirm the truck really is a 2010 F-150 and see its cab and engine.
  2. Run the recall check, which reads NHTSA's records for that VIN.
  3. Write down any open campaign number and ask the seller or a Ford dealer about its repair status.
  4. If nothing is open, move on to the title, damage and odometer questions the recall check cannot answer.

A search by model year gives results for the whole line. A search by VIN speaks to the one truck in your driveway or on the lot, and that is the answer a buyer needs.

Person researching on a phone beside four numbered F-150 recall check steps

What a clean VIN result does and does not tell you

NHTSA's own page lists what its VIN search leaves out, and several items matter for a truck this age.

The lookup does not showWhy it matters on a 2010 F-150
Recalls already repairedA closed campaign hides the date and the shop, so ask for paperwork
Safety recalls more than 15 years oldThe door handle notice dates to January 2011, so it sits at that edge and may not appear
Non-safety manufacturer campaignsService bulletins and goodwill repairs never appear
Recalls just announcedVINs are added over time, so recheck before you pay

That second row is worth acting on. If the lookup returns nothing open on a truck built in the campaign window, a call to Ford with the VIN is a sensible extra step, since the maker sometimes extends coverage.

What owners report beyond the recall

A recall list covers only defects that reached a formal campaign. NHTSA also holds 843 owner complaints filed under the 2010 F-150, and most describe problems that were never recalled. The components named most often are the electrical system, power train and engine, with visibility and wiper complaints close behind.

Of those complaints, 23 mention a crash, 35 mention a fire, and the injuries reported add up to 28, with no deaths. Complaints are unverified owner statements, so read them as a list of questions to put to a mechanic rather than a verdict on the truck.

From an NHTSA owner complaint

A different owner reported, in December 2021 at roughly 182,000 miles, that just one door of a 2010 F-150 would open, whether from the handle inside or out. A garage told them the latch assembly needed replacing. Latch trouble can be wear rather than the recalled handle, so test every door yourself.

If you own one or are about to buy one

Owners: run the VIN today, and if the handle campaign is open, book the dealer visit. The repair is free, and the SaferCar app from NHTSA can alert you if a new recall is added later.

Buyers: test each interior handle for a clean snap back, check the build date sticker against the campaign window, and ask to see the repair order if the seller claims the work is finished. Then check title and damage history before you hand over money.

Where this information comes from

Sources and photos: Facts checked against the sources above in November 2026. Photos by Zoshua Colah, Jakub Żerdzicki and Nina Mercado on Unsplash; diagrams by MyFreeVINCheck.

Keep reading

Frequently asked questions

How many recalls does the 2010 Ford F-150 have?

NHTSA's recalls data lists one campaign under the 2010 model year, 11V049000, about the interior door handle spring. It is shared with 2009 trucks. A single truck may fall outside it depending on build date, and the VIN check shows whether it applies.

Is the 2010 F-150 door handle recall free to fix?

Yes. Per the campaign record, the dealer reinforces the spring housing or fits a new handle module without billing the owner. Bring the VIN, ask for the repair order afterward, and call Ford's owner line listed in the NHTSA record if the dealer is unsure.

Can I check a 2010 F-150 by license plate?

NHTSA offers a plate search that uses state DMV data, but it can return a previous owner's truck. The VIN is more reliable. Copy it from the windshield or your paperwork and run that.

Why does the lookup show nothing open when my truck is in the build window?

Either the repair was done and reported, or the campaign is old enough that NHTSA's VIN search leaves it out. Ask a Ford dealer to look up the VIN, and request any repair order that shows the handle inspection.

Is a truck safe to buy if the recall result is clean?

No. It means no open safety campaign applies to that VIN in NHTSA's records. Wrecks, salvage brands, flood damage and odometer rollbacks sit in other records, which is what a paid history report is for.

Now check the car itself

The guide explains what to look for. The report shows what this VIN has on record.

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.